DYEING PROCEDURE
DISSOLVING OF
BASIC DYES
The dyestuff is
pasted with an equal amount of Acetic Acid (40%) and boiling water
is then added.
Cotton & Viscose fibres are first mordanted with Tannic Acid
Tartarematic and subsequently dyed with Basic Dyes at around 50-60oC.
The illustration serve only as a guideline, since depth and tone
depends on actual condition and raw material used.
Fastness
Properties :
Fastness Figures Light: 1 to 8 in increasing order.
Others:
1 to 5 in increasing order |
The
information and procedure provided here is in good
faith and to the best of our knowledge, but without liabilities.
|
